CRYSTAL QUEST® 30,000 GPD Reverse Osmosis System

Detailed Description

Membrane: Twenty 4" x 40" TFC HF1 Membranes

Membrane Housing: 4" x 80" Membrane Housings

Pump & Motor: Grundfos 5 HP Motor and Stainless Steel Pump

Frame: Aluminum White Powder Coated Frame

Bag Filter: 32” Rosendale Bag Filter, 10 Micron Filter

Cartridge Filter: 2.5" x 40" 5 Micron Sediment Filter

Chemical Injection: Pulsafeeder 30 Gallon Chemical Feed System

Pressure Gauges: 2.5" Gauge, 0-300 PSI, Panel Mount Glycerin Filled, and 1.5" Gauge, 0-160 PSI, Top Mount, Dry Gauge

Low Pressure Switch: Square D Low Pressure Switch

Solenoid Valve: Solenoid Valve with Manual Override

Computer Controller: Rotrol S-150 Computer Controller, 220 volts AC, single phase, with built-in TDS monitor - pre-treat lockouts, tank full contacts, magnetic motor starter, low pressure monitoring, and alarms.

Flow Meters: One Product (0-20 GPM) & One Waste (0-20 GPM) Flow Meters

Easy Maintenance & Operation: CRYSTAL QUEST® commercial reverse osmosis systems feature a compact design and have all of their components strategically located for easy access and inspection.

Optional Features

Stainless Steel Housings: Ten 4” x 80” Puro Tech Stainless Steel Membrane Housings, 1/2” FNPT

High Pressure Switch: One Square D High Pressure Switch, Automatically starts when the tank pressure falls below 40 psi, and stops when the pressure reaches 60 psi.

Auto Flush: This feature will flush the systems membranes with the feed water, thus extending membrane life.

Float Switch: One Mechanical Float Switch, For atmospheric storage tank applications.

Concentrate Re-Circulate w/ 0-10 GPM Flow Meter: This feature offers a higher recovery rate for the system by taking a percentage of the waste water and feeding it back into the system.

System Specifications

Operating Specifications

Design	Horizontal
Gallons Per Day	30,000 @ 77 F
Dimensions (Approx.)	41" x 143" x 80"
Weight (Approx.)	NA
Concentrate Re-Circulate	Optional
Auto Flush	Optional
Element Size (in.)	4040 TFC HF
Elements (Qty.)	20
Motor HP	5
Voltage	110 or 220 Volts AC
Hertz	60 or 50 cycle
Feed Connection	2"
Product Connection	1.5"
Waste Connection	1.5"

Minimum Feed Pressure	35 psi
Minimum NaCl - % Rejection	96%
Minimum Feed (GPM)	30
Maximum Hardness	15 Grains / Gallon
Maximum TDS	2000 ppm
Operating Pressure	150 psi
Maximum NaCl - % Rejection	98.5%
Maximum Feed (GPM)	50
pH Range	3 - 11
Maximum Temperature	105⁰ F

Additional cost will apply to listed price for custom modification based on water laboratory test report.

Policies | Copyright | Legal