CRYSTAL QUEST® Commercial and Industrial Reverse Osmosis

 
 
 
 

 

FAQ

 

Reports On Your City's Water

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 CRYSTAL QUEST® Commercial and Industrial Reverse Osmosis
CRYSTAL QUEST® Reverse Osmosis systems are ruggedly designed and manufactured for dependable and simple operation. These units provide a higher output of continuous quality de-mineralized water for many industrial applications such restaurants, pharmaceuticals,  bottled water plants, coolant or chemical mixing, and the list goes on. RO units are completely assembled and shipped ready for a trouble-free installation and start up. All units are factory tested prior to delivery to ensure quality and performance.
 
    CRYSTAL QUEST® Light Commercial Reverse Osmosis

Model: CQE-CO-02022

CRYSTAL QUEST® 200 GPD Reverse Osmosis System

  • One 2.5" x 14" TFC HF1 Membrane.
  • One 2.5" x 14" Champ Membrane Housing.
  • Aquatec 8800 Booster Pump 110 volts AC.
  • Aluminum, White Powder Coated, Triple Bracket.
  • 2.5" x 20" Slim Line 5 Micron Polypropylene Filter.
  • 2.5" x 20" Slim Line 5 Micron Coconut Shell Carbon Block.
  • 2.5" x 20" Slim Line Coconut Shell GAC/ERA Filter.
  • Three 2.5" x 20" Slim Line Double O-Ring Filter Housings.
  • 1.5” 0-200 PSI, Pressure Gauge.
  • Aquatec Tank Pressure Switch w/ 1/4” JG Ports 20-40 PSI.
  • Aquatec Electronic 24 Volt Solenoid Valve.
  • Aquatec Auto-Flush Timer Valve.
  • Aquatec 8800 24 V AC Transformer 2 Amp, 110 Volt AC input.

Price: $995.00

  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02023

CRYSTAL QUEST® 300 GPD Reverse Osmosis System

  • One 2.5" x 21" TFC HF1 Membrane.
  • One 2.5" x 21" Champ Membrane Housing.
  • Aquatec 8800 Booster Pump 110 volts AC, 60 hertz.
  • Aluminum, White Powder Coated, Triple Bracket.
  • 2.5" x 20" Slim Line 5 Micron Polypropylene pre-filter.
  • 2.5" x 20" Slim Line 5 Micron Coconut Shell Carbon Block pre-filter.
  • 2.5" x 20" Slim Line Coconut Shell GAC/ERA pre-filter.
  • Three 2.5" x 20" Slim Line Double O-Ring Filter Housings.
  • 1.5” 0-200 PSI, Pressure Gauge.
  • Aquatec Tank Pressure Switch w/ 1/4” JG Ports 20-40 PSI.
  • Aquatec Electronic 24 Volt Solenoid Valve.
  • Aquatec Auto-Flush Timer Valve.
  • Aquatec 8800 24 V AC Transformer 2 Amp, 110 Volts AC input.

Price: $1395.00

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02024

CRYSTAL QUEST® 500 GPD Reverse Osmosis System

  • Two 2.5" x 21" TFC membranes
  • 3.2 GPM brass rotary vane pump, coupled directly to the motor
  • 1/3 HP motor - 110 Volts 60 Hertz or 220 Volts 50 Hertz.
  • Aluminum frame, white powder coated, corrosion resistant, and light weight.
  • One 4.5" x 10" 5 Micron Sediment pre-filter.
  • One 4.5" x 10" 5 Micron Coconut Shell Carbon Block pre-filter.
  • One 2.5" 0-300 psi panel gauge and two 1.5" 0-160 psi top mount gauges
  • Low pressure switch - (Safety device to protect the pump from running dry).
  • Solenoid valve with manual override. 110 Volt 60 Hertz, or 220 Volt 50 Hertz.
  • One 1/4" brass needle manual flush valve - Regulates the product to waste ratio (system recovery)
  • Manual on/off switch.

Price: $1,895.00

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02025

CRYSTAL QUEST® 1,000 GPD Reverse Osmosis System

  • Three 2.5" x 21" TFC membranes
  • 3.2 GPM brass rotary vane pump coupled directly to the motor.
  • 1/2 HP motor - 110 Volt 60 Hertz or or 220 Volt 50 Hertz.
  • Aluminum frame, white powder coated, corrosion resistant, and light weight.
  • One 4.5" x 10" 5 Micron Sediment pre-filter.
  • One 4.5" x 10" 5 Micron Coconut Shell Carbon Block pre-filter.
  • One 2.5" 0-300 psi panel gauge and two 1.5" 0-160 psi top mount gauges
  • Low pressure switch - (Safety device to protect the pump from running dry).
  • Solenoid valve with manual override. 110 Volt 60 Hertz or 220 Volt 50 Hertz.
  • 1/4" brass needle manual flush valve - Regulates the product to waste ratio (system recovery)
  • Manual on/off switch

Price: $2,445.00

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02026

CRYSTAL QUEST® 1,500 GPD Reverse Osmosis System

  • Two 2.5" x 40" TFC membranes
  • 3.2 GPM brass rotary vane pump coupled directly to the motor. 
  • 1/2 HP motor - 110 Volt 60 Hertz, or 220 Volt 50 Hertz.
  • Aluminum frame, white powder coated, corrosion resistant, and light weight.
  • One 4.5" x 20" 5 Micron Sediment pre-filter.
  • One 4.5" x 20" 5 Micron Coconut Shell Carbon Block pre-filter.
  • One 2.5" 0-300 psi panel gauge and two 1.5" 0-160 psi top mount gauges
  • Low pressure switch - (Safety device to protect the pump from running dry).
  • Solenoid valve with manual override. 110 Volt 60 Hertz or 220 Volt 50 Hertz.
  • 1/4" brass needle manual flush valve - Regulates the product to waste ratio (system recovery)
  • Manual on/off switch.

 
Price: $2,845.00

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.
 

Model: CQE-CO-02027

CRYSTAL QUEST® 2,500 GPD Reverse Osmosis System

  • Three 2.5" x 40" TFC membranes
  • 5.3 GPM brass rotary vane pump coupled directly to the motor.
  • 3/4 HP motor - 110 Volt 60 hertz or 220 Volt 50 Hertz.
  • Aluminum frame, white powder coated, corrosion resistant, and light weight.
  • One 4.5" x 20" 5 Micron Sediment pre-filter.
  • One 4.5" x 20" 5 Micron Coconut Shell Carbon Block pre-filter.
  • One 2.5" 0-300 psi panel gauge and two 1.5" 0-160 psi top mount gauges
  • Low pressure switch - (Safety device to protect the pump from running dry)
  • Solenoid valve with manual override. 110 Volt 60 Hertz. or 220 Volt 50 Hertz
  • 1/4" brass needle manual flush valve - Regulates the product to waste ratio (system recovery)
  • Manual on/off switch.

Price: $3,245.00

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02028

CRYSTAL QUEST® 4,000 GPD Reverse Osmosis System

  • Two 4" x 40" TFC membranes
  • 1 HP multi-stage pump and motor. 110 or 220 volt, 50 or 60 hertz and single phase.
  • Frame is aluminum, white powder coated, corrosion resistant, and light weight.
  • One 4.5" x 20" 5 Micron Sediment pre-filter.
  • One 4.5" x 20" Coconut Shell GAC/ERA pre-filters.
  • One 4.5" x 20" 5 Micron Coconut Shell Carbon Block pre-filter.
  • One 2.5" 0-300 psi panel mount gauge and two 1.5" 0-160 psi top mount gauges
  • One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure.
  • One solenoid valve with manual override. 110 Volt 60 hertz or 220 volt and 50 hertz.
  • One 1/2" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery)

Price: $4,945.00

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02029

CRYSTAL QUEST® 5,000 GPD Reverse Osmosis System

  • Three 4" x 40" TFC membranes
  • One 1.5 HP multistage pump and motor, 110 or 220 volt, 50 or 60 hertz and single phase
  • Frame is aluminum, white powder coated, corrosion resistant, and light weight
  • One 4.5" x 20" 5 Micron Sediment pre-filter.,
  • One 4.5" x 20" Coconut Shell GAC/ERA pre-filters.
  • One 4.5" x 20" 5 Micron Coconut Shell Carbon Block pre-filter.
  • Two 2.5" 0-300 psi panel mount gauges and two 1.5" 0-160 psi top mount gauges
  • One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure
  • One solenoid valve with manual override. 110 Volt 60 hertz or 220 Volt 50 hertz.
  • One 1/2" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery)
  • One computer controller. 110 or 220 volt with pre-treat lockout, tank full contacts, low pressure monitoring and alarm
  • One product water (0-10 GPM) and one waste water (0-10 GPM) flow meters
  • One panel mount TDS meter
  • One manual on/off

Price: $5,545.00

  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02030

CRYSTAL QUEST® 7,000 GPD Reverse Osmosis System

  • Four 4" x 40" TFC membranes
  • One 1.5 HP multistage pump and motor, 110 or 220 volt, 50 or 60 hertz and single phase
  • Frame is aluminum, white powder coated, corrosion resistant, and light weight
  • One 4.5" x 20" 5 Micron Sediment pre-filter.
  • One 4.5" x 20" Coconut Shell GAC/ERA pre-filters.
  • One 4.5" x 20"5 Micron Coconut Shell Carbon Block pre-filter.
  • Two 2.5" 0-300 psi panel mount gauges and two 1.5" 0-160 psi top mount gauges.
  • One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure
  • One solenoid valve with manual override. 110 Volt 60 hertz or 220 volt 50 hertz.
  • One 1/2" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery)
  • One computer controller. 220 volt with pre-treat lockout, tank full contacts, low pressure monitoring and alarm
  • One product water (0-10 GPM) and one waste water (0-10 GPM) flow meters
  • One panel mount TDS meter

Price: $6,145.00

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02031

CRYSTAL QUEST® 10,000 GPD Reverse Osmosis System

  • Six 4" x 40 " TFC membranes
  • One 3 HP multistage pump and motor. 220 volt, 60 hertz, single phase.
  • Frame is aluminum, white powder coated, corrosion resistant, and light weight.
  • One 18" 10 micron bag-type sediment filter.
  • One 4.5" x 20" polyethylene sediment filter
  • One 4.5" x 20" Coconut Shell GAC/ERA filter
  • Two 2.5" 0-300 psi panel mount gauges and two 1.5" 0-160 psi top mount gauges
  • One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure.
  • One solenoid valve with manual override. 220 volt and 60 hertz.
  • One 1/2" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery)
  • One computer controller. 220 volt with built-in TDS monitor, pre-treat lockout, tank full contacts, low pressure monitoring and alarm.
  • One product water (0-10 GPM) and one wastewater (0-10 GPM) flow meters.

Price: $10,095.00

  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02032

CRYSTAL QUEST® 15,000 GPD Reverse Osmosis System

  • Eight 4" x 40" TFC membranes
  • One 3 HP multistage pump and motor. 220 volt, 60 hertz, single phase.
  • Frame is aluminum, white powder coated, corrosion resistant and light weight.
  • One 18" FSI 10 micron bag-type sediment filter.
  • One 4.5" x 20" coconut shell GAC/ERA filter.
  • Two 2.5" 0-300 psi panel mount gauges and two 1.5" 0-160 psi top mount gauges
  • One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure.
  • One solenoid valve with manual override. 220 volt, 60 hertz.
  • One 1/2" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery).
  • One computer controller. 220 volt with built-in TDS monitor, pre-treat lockout, tank full contacts, low pressure monitoring and alarm.
  • One product water (0-10 GPM) and one waste .

Price: $15,245.00

  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02033

CRYSTAL QUEST® 20,000 GPD Reverse Osmosis System

  • Ten 4" x 40" TFC membranes
  • One 5 HP multistage pump and motor. 220 volt, 60 hertz, three phase.
  • Frame is aluminum, white powder coated, corrosion resistant, and light weight.
  • One 18" FSI 10 micron bag-type sediment filter.
  • One 4.5" x 20" coconut shell GAC/ERA filter.
  • Two 2.5" 0-300 psi panel mount gauges and two 1.5" 0-160 psi top mount gauges
  • One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure.
  • One solenoid valve with manual override. 220 volt, 60 hertz.
  • One 3/4" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery)
  • One computer controller. 220 volt with built-in TDS monitor, pre-treat lockout, tank full contacts, low pressure. monitoring and alarm .
  • One product water (0-10 GPM) and one waste.

Price: $23,545.00

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

CRYSTAL QUEST® Industrial Reverse Osmosis 30,000 - 120,000 GPD (gallons per day)

 
CRYSTAL QUEST® industrial sized reverse osmosis units are suitable for heavy commercial and industrial applications. Our Reverse Osmosis Systems are known for their excellent pre-treatment design, quality and high performance and designed for higher recovery rates and minimum energy consumption.
 
 
 

Model: CQE-CO-02034

      CRYSTAL QUEST® 30,000 GPD Reverse Osmosis System with Chemical Feed System

  • Twenty 4" x 40" TFC membranes
  • One Grundfos 5 HP Motor and stainless steel pump
  • Frame is aluminum, white powder coated, corrosion resistant, and light weight.
  • 32" 10 micron sediment bag-type filter.
  • 2.5" x 40" coconut shell GAC/ERA filter.
  • Two 2.5" 0-300 psi panel mount gauges and two 1.5" 0-160 psi top mount gauges.
  • One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure.
  • One solenoid valve with manual override. 220 volt, 60 hertz.
  • One 1/2" stainless steel needle manual flush valve - Regulates  the product to waste ratio (system recovery).
  • One computer controller. 220 volt with built-in TDS monitor, pre-treat lockout, tank full contacts, magnetic motor started, low pressure monitoring and alarm.
  • One product water (0-20 GPM) and one waste water (0-20 GPM) flow meters.

 
 
Price: $34,345.00  

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02035

CRYSTAL QUEST® 40,000 GPD Reverse Osmosis System with Chemical Feed System
  • Twenty 4" x 40" TFC membranes
  • One Grundfos 6 HP Motor and stainless steel pump
  • Frame is aluminum, white powder coated, corrosion resistant, and light weight.
  • 32" 10 micron sediment bag-type filter.
  • 2.5" x 40" coconut shell GAC/ERA filter.
  • Two 2.5" 0-300 psi panel mount gauges and two 1.5" 0-160 psi top mount gauges.
  • One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure.
  • One solenoid valve with manual override. 220 volt, 60 hertz.
  • One 1/2" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery).
  • One computer controller. 220 volt with built-in TDS monitor, pre-treat lockout, tank full contacts, magnetic motor started, low pressure monitoring and alarm.
  • One product water (0-20 GPM) and one waste water (0-20 GPM) flow meters.

 
Price: $41,944.00  

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

Model: CQE-CO-02036

CRYSTAL QUEST®  50,000 GPD Reverse Osmosis System with Chemical Feed System
  • Twenty 4" x 40" TFC membranes
  • One Grundfos 7 HP Motor and stainless steel pump
  • Frame is aluminum, white powder coated, corrosion resistant, and light weight.
  • 32" 10 micron bag-type sediment filter.
  • 2.5" x 40" coconut shell GAC/ERA filter.
  • Two 2.5" 0-300 psi panel mount gauges and two 1.5" 0-160 psi top mount gauges.
  • One low pressure switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure.
  • One solenoid valve with manual override. 220 volt, 60 hertz.
  • One 1/2" stainless steel needle manual flush valve - Regulates the product to waste ratio (system recovery).
  • One computer controller. 220 volt with built-in TDS monitor, pre-treat lockout, tank full contacts, magnetic motor started, low pressure monitoring and alarm .
  • One product water (0-20 GPM) and one waste water (0-20 GPM)
    flow meters.

 
Price: $46,244.00  

 
  • Additional cost will apply to listed price for custom modification based on water laboratory test report.

 

Industrial Reverse Osmosis

Our Industrial Reverse Osmosis Systems provide an efficient and economical solution for applications ranging in size from 34,000 to
1,000,000 GPD. High quality components, compact size, easy-to-use features, as well as an expandable design make our Industrial Reverse Osmosis Systems the premier choice for industrial water purification applications.

Standard Features:  
  • Horizontal Skid Mounted
  • Durable & Efficient Stainless Steel Pressure Pump
  • US Motor 220 Volt, 60 Hertz, 3 Phase
  • FRP Housings                                     
  • Liquid Filled Gauges
  • Thin Film Composite Elements                                   
  • Water Quality TDS Meter
  • High Pressure Piping                                      
  • Stainless Steel Control Valve
  • Panel Mount Flow Meters                               
  • Low & High Pressure Protection
  • Automatic Flush on Shut down                       
  • Sample Ports on Permeate Lines
  • Manual & Auto Operation                               
  • 5 Micron Pre-Filtration
  • Stainless Steel Feed Water Temperature Gauge                   
  • Anti-Scalant Injection System
  • NEMA 12 Electric Enclosures
   
Optional Features:
  • Stainless Steel Housings                    
  • Stainless steel Submersible Pump
  • Concentrate Recycle Valve                
  • Stainless Steel Frame
  • Alternate 220/240/415/440 50 Hertz 3 Phase    
  • Cleaning Ports
  • Cleaning/Sanitizing System   
  • NEMA Four Electrical Enclosures
  • Cellulose Tri-Acetate Elements
  • Ultra-filtration Elements                       
  • Nano-filtration Elements
  • Chemical Feed System
  • Ph Monitor                                                      
  • Storage Tank with Level Control
  • Ultraviolet System                              
  • Re-pressurization System
  • System Pre-treatment                                     
  • System Post-treatment
  • Permeate Diverted to Drain                
  • Wooden Crate or Container
Gallons Per Day Dimensions - inches Inlet Size Recovery Membrane Quantity Motor 208-230-460 3PH 60 HZ
  L W H            
34,000 42 100 66 2" 65% 8040 4 10 HP  
45,000 42 140 66 2" 65% 8040 6 15 HP  
58,000 48 140 72 2" 65% 8040 8 20 HP  
70,000 60 200 72 3" 65% 8040 9 20 HP  
120,000 60 200 72 3" 65% 8040 16 30 HP  
144,000 60 200 72 3" 65% 8040 18 30 HP  
201,000 42 290 72 4" 65% 8040 24 50 HP  
260,000 42 290 66 4" 65% 8040 34 50 HP  
* All specifications are approximate and subject to revision due to final design considerations.
* Initial water production based upon pretreated feed water, 225 psi applied pressure, 77 F (25 C)
* Incoming water temperature, 1,000 ppm NaCl, 10% recovery and 0 psi product pressure.
* Water production decreases approximately 1.5% per 1 F(3% per 1 C) incoming water temperature drop.
* Final Design, Recovery, and Final Price May Depend on Water Analysis Provided By Customer.
   
  • We charge actual shipping charges for items purchased.
  • Design and specifications are subject to change without notice.

For  your specific needs of custom-made water treatment contact us at commercial@crystalquest.com